Abstract: In order to solve the problem of single well without liquid phase measurement in Sulige Gas Field under the process mode of interwell series connection and wellhead wet gas measurement, a method of combining throttle flowmeter and vortex flowmeter to measure wet gas-liquid two-phase flow was proposed. The overall structure of flowmeter was simplified by integrating two kinds of flowmeter measuring tubes and adopting differential pressure static pressure, frequency and temperature integrated sensors. The indoor air-water two-phase flow experimental platform was used to test the measurement accuracy of the wet gas flowmeter. The results show that when the instantaneous liquid volume is 0.05-4 m³/h, the gas and liquid measurement errors of the combined wet gas flowmeter are within 5% and 20% respectively. The measurement accuracy of the wet gas flowmeter was tested at the wellhead of the gas well by using the separation metering device. The results show that the average error of gas and liquid phase measurement in the bubble exhaust well is less than 5% and 20% respectively, which can accurately reflect the liquid production law of the gas well and guide the optimization of the bubble discharge and filling system; the gas phase measurement error in the plunger gas lift well is less than 8%, and the liquid phase measurement error is large, but it can accurately reflect the liquid production characteristics of the plunger gas well, which could provide the basis for working condition diagnosis and production system optimization of plunger gas well.