李柏松, 杨晓峥, 苏建峰, 谭东杰, 刘志海, 张兴, 刘诚, 董学刚. 2 500 kW级管道输油泵的国产化研制及应用[J]. 油气储运, 2017, 36(8): 943-947. DOI: 10.6047/j.issn.1000-8241.2017.08.012
引用本文: 李柏松, 杨晓峥, 苏建峰, 谭东杰, 刘志海, 张兴, 刘诚, 董学刚. 2 500 kW级管道输油泵的国产化研制及应用[J]. 油气储运, 2017, 36(8): 943-947. DOI: 10.6047/j.issn.1000-8241.2017.08.012
LI Bosong, YANG Xiaozheng, SU Jianfeng, TAN Dongjie, LIU Zhihai, ZHANG Xing, LIU Cheng, DONG Xuegang. Development and application of localized 2 500 kW oil line pump[J]. Oil & Gas Storage and Transportation, 2017, 36(8): 943-947. DOI: 10.6047/j.issn.1000-8241.2017.08.012
Citation: LI Bosong, YANG Xiaozheng, SU Jianfeng, TAN Dongjie, LIU Zhihai, ZHANG Xing, LIU Cheng, DONG Xuegang. Development and application of localized 2 500 kW oil line pump[J]. Oil & Gas Storage and Transportation, 2017, 36(8): 943-947. DOI: 10.6047/j.issn.1000-8241.2017.08.012

2 500 kW级管道输油泵的国产化研制及应用

Development and application of localized 2 500 kW oil line pump

  • 摘要: 为了响应国家政策号召,保障国家能源安全和支持民族工业发展,近年来中国石油组织开展了管道输油泵国产化的相关研究,特别是在2 500 kW级双额定工况管道输油泵研制方面成效显著。管道输油泵国产化经历了以使用国产输油泵为主、引进消化吸收、国产化加速发展3个阶段。国产化管道输油泵为单级双吸水平中开结构,设计了高效水力新模型,能够通过更换叶轮和导叶实现同一壳体两个额定工况功能,同时采用滚动轴承支撑、高性能密封环及集装式机械密封等配套方案。利用同一测试平台、同一标准对3个不同厂家的试制产品进行出厂性能比对测试,结果显示国产化管道输油泵额定效率可以达到89.8%。

     

    Abstract: To respond the call of the national policy to ensure national energy safety and support the development of national industry, PetroChina has carried out a series of studies to realize localization of oil line pumps in recent years, and remarkable result is especially achieved in the development of 2 500 kW oil line pump with double rated condition. In this paper, the localization process of oil line pump was introduced, and it is divided into three stages, i.e., the dominant stage of domestic oil pump, the introduction, digestion and absorption stage and the localization accelerating stage. The localized oil line pump is in the structure of single stage, double suction and horizontal split. A new high-efficiency hydraulic model was designed. The function of double rated condition could be realized in one shell by changing impeller and guide vane. The following supporting programs are adopted, including rolling bearing support, high performance sealing ring and cartridge mechanical seal. Finally, the ex-factory performances of three different factories' trial products were comparatively tested on the same test platform according to the same test standard. It is shown that the power rating of this localized oil line pump is up to 89.8%.

     

/

返回文章
返回