English
孟庆久, 刘康勇, 石中玉. 压力容器制造中存在的问题及解决方案[J]. 油气储运, 2002, 21(4): 50-52. DOI: 10.6047/j.issn.1000-8241.2002.04.016
引用本文: 孟庆久, 刘康勇, 石中玉. 压力容器制造中存在的问题及解决方案[J]. 油气储运, 2002, 21(4): 50-52. DOI: 10.6047/j.issn.1000-8241.2002.04.016
shu
MENG Qingjiu, LIU Kangyong, . The Method to Solve Problems existed in the Manufacture of Pressure Vessel[J]. Oil & Gas Storage and Transportation, 2002, 21(4): 50-52. DOI: 10.6047/j.issn.1000-8241.2002.04.016
Citation: MENG Qingjiu, LIU Kangyong, . The Method to Solve Problems existed in the Manufacture of Pressure Vessel[J]. Oil & Gas Storage and Transportation, 2002, 21(4): 50-52. DOI: 10.6047/j.issn.1000-8241.2002.04.016
shu

压力容器制造中存在的问题及解决方案

The Method to Solve Problems existed in the Manufacture of Pressure Vessel

    摘要
  • 摘要: 通过对压力容器在制造过程中出现的问题进行理论分析和计算, 提出了如何控制钢板的最小弯曲半径、消除钢板端部剩余直边、调整三辊卷板机参数等具体方法。

     

    Abstract: In this article, the method to solve problems existd in the manufacture of pressure vessel is presented. The problems mclude how 10 control the minimum bending radius of steel plate, to eliminate the residual rectangularity of plate end and to adjust the parameters of 3 roller plate bender. The theoretial analysis is made on these problems and the method to solve the problems is presented by means of calculation.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回